Choose a 3D Printer

Introduction: There are many different types of 3D Printer out there in the market, but affordability is so important, RepRap was the first low-cost 3D printer.

RepRap Project started the open-source 3D Printer revolution. It has become the most widely used 3D Printer among the global members of the Maker Community.

Benefits of RepRap 3D Printer

  • Ground-floor knowledge of cutting edge tech
  • Hands-on experiences that opens doors
  • At an affordable price

 

Comparisons of different type of 3D Printers lower than $10,000 dollar.

FFF 3D Printer
(Fused filament fabrication)

DLP 3D Printer
(Direct Light Processing printer)

Stereolithography Printer
(Laser)

Price Range $500 – $600 (DIY kits) $3000 up $3000 up
Resin or Filament $32 per kg $190 – $250 per kg $150 – $170 per liter
Multi-color Support Yes No No
Minimum Layer Resolution 100 microns 25 microns 25 microns
Standard Build Volume 180 x 180 x 180 100 x 80 x 180 125 x 125 x 165

 

You may also like...